I installed my Lockhart Phillips Flushmout IV (Medium/Amber, single filament) Signals in March 2001.  I chose the medium sized signals because they covered the fairing holes perfectly.  I tried the large size, but the back of the signal hit the inner fairing.  The installation took about 2 hours.  I used bullet connectors to make the wiring connections. 

- Remove the ram air cover, lower fairings & inner fairing to provide maximum access.
- I chose to retain the rubber grommets to better protect the fairing.
- The Flush Mount IV wiring on my bike is as follows:
LEFT SIDE-- orange plug: orange wire connects to black wire on LP, orange/white wire is terminated. -- white plug: green wire connects to black/white wire on LP.
RIGHT SIDE-- blue plug: blue wire connects to black wire on LP, blue/white wire is terminated. -- white plug: green wire connects to black/white wire on LP.
- TEST for proper signal operation before you make your final connections!!!

Stock Number:  122-9720

This site was last updated 06/16/06